Skip Navigation LinksARC10 ARC 10

  • Resistant to wide spectrum of chemicals including Alkalis, Acids and Solvents
    • Covers a broad range of chemical exposures.Get it righ the first time
  • 100% solids; no VOCs; no free isocyanates
    • Enhances safe use
  • High build viscosity
    • Suitable for rebuilding pitted and scored surfaces to a thickness of >6mm (.25”) in a single coat
  • Polymer alloy reinforced
    • Ease of machining
 
Flange faces
Worn valve bodies
Shafts
Scored hydraulic rams
Bearing housings
Pitted metal
Worn keyways
Corroded stuffing boxes


Composition Matrix A modified epoxy resin reacted with an aliphatic amine curing agent
​​Composit​ion ​ReinforcementProprietary blend of metallic alloy particles
​​​​
​​​Cured Density​​​​​ 2.0 g/cc​ 125 lb/ cu.ft.
Tensile Adhesion(ASTM D 4541) 256.6 kg/cm2 (25.2 MPa) 3,650 psi
Compressive Strength(ASTM D 695) 930 kg/cm2 13,000 psi
Flexural Strength(ASTM D 790) 710 kg/cm2 10,000 psi
Flexural Modulus(ASTM D 790) 3.6 x 104 kg/cm2 5.1 x 105 psi
Tensile Strength(ASTM D 638)280 kg/cm24,000 psi
Taber Wear Weight Loss(ASTM D 4060)(H-18/250 g/1000 cycles)275 mg
Composite Shore D Durometer Hardness(ASTM D 2240)86
Vertical Sag Resistance at 21°C (70°F) and 6 mm (1/4")No sag
Maximum Temperature (Dependent on Service)​Wet Service
Dry Service
66°C
93°C
150°F
200°F
​​
Click Here for Foreign Language Literature

 

 

SDS (Part A) - ARC 10 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/as10A_EN.pdfSDS (Part A) - ARC 10 (English)
Application Instructions - ARC 10 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_10_EN.pdfApplication Instructions - ARC 10 (English)
Product Datasheet - ARC 10 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/ad10_EN.pdfProduct Datasheet - ARC 10 (English)
SDS (Part B) - ARC 10 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/as10b_EN.pdfSDS (Part B) - ARC 10 (English)

Click Here for Foreign Language Literature

 

 

ARC Case Study 129 - Oil & Gas - Refineryhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23650_ARC-CS129_OIL-GAS_DOWNSTREAM_SPLIT-CASE-PUMP.pdfARC Case Study 129 - Oil & Gas - Refinery

Nominal, based on a 3 mm (120 mil) thickness

  • 250 g kit covers 420 cm2 (65 in2)
  • 1.5 liter kit covers 0.5 m2 (5.3 ft2)
     
    Note: Components are pre-measured and pre-weighed.
    Each kit includes mixing and application instructions plus tools.

Available Colors

Gray