Skip Navigation LinksARC797 ARC 797

  • Low mixed viscosity
    • Penetrates into concrete sealing surface
  • 100% solids; no VOCs; no free isocyanates
    • Enhances safe use
    • Allows for immediate over-coating on horizontal surfaces​​
    • No shrinkage on cu​re
  • Can be applied to damp concrete
    • Saves time
    • Allows application under broad conditions
  • Promotes strong adhesion to concrete
    • Prevents delamination
    • Contributes to permeation resistance 
 

As a primer:  Primarily for ARC 791 & 988​

Secondarily ​for CS​2 & CS4

As a sealer for:

Concrete tanks
Sumps, drains & pits
Secondary containment
Process floor areas
Water intakes & dams
Pump & equipment bases


Composition MatrixA modified epoxy resin reacted with aliphatic amine curing agent
​​​​
​​​Cured Density​​​​​1.05 g/cc​65 lb/ cu. ft.
Adhesion to Concrete(ASTM D 4541)>35.1 kg/cm2 (>3.4 MPa)>500 psi Concrete Failure
Maximum Service Temperature (Dependent on service)(Water Immersion) Continuous
(Water Immersion) Intermittent
66°C
93°C
150°F
200°F
​​​
Click Here for Foreign Language Literature

 

 

Product Datasheet - ARC 797 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/ad797_EN.pdfProduct Datasheet - ARC 797 (English)
Application Instructions - ARC 797 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_797_EN.pdfApplication Instructions - ARC 797 (English)
Bulk Packaging Mixing Instructions - ARC 797 (English/US)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI797bulk1_EN (US).pdfBulk Packaging Mixing Instructions - ARC 797 (English/US)
SDS (Part A) - ARC 797 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/as797a_EN.pdfSDS (Part A) - ARC 797 (English)
SDS (Part B) - ARC 797 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/as797b_EN.pdfSDS (Part B) - ARC 797 (English)

Click Here for Foreign Language Literature

 

 

ARC Case Study 002 - Pulp and Paper - Concrete Floor Repairhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.08_ARC-CS002_PULP-PAPER_CONCRETE-FLOOR-REPAIR.pdfARC Case Study 002 - Pulp and Paper - Concrete Floor Repair
ARC Case Study 004: Pulp & Paper Industry / Wastewater Clarifier - Rake Armhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.06_ARC-CS004_PULP-PAPER_CLARIFLER-RAKE-ARM-CARRYING-RING.pdfARC Case Study 004: Pulp & Paper Industry / Wastewater Clarifier - Rake Arm
ARC Case Study 063: Chemical Processing Industry - Secondary Containmenthttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.62_ARC-CS063_CHEMICAL-PROCESSING_SECONDARY-CONTAINMENT.pdfARC Case Study 063: Chemical Processing Industry - Secondary Containment
ARC Case Study 003: Pulp & Paper Industry/Waste Water Effluent Pumpshttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.07_ARC-CS003_PULP-PAPER_WASTEWATER-EFFLUENT-PUMPS.pdfARC Case Study 003: Pulp & Paper Industry/Waste Water Effluent Pumps
ARC Case Study 001: Pulp & Paper: Scraper Conveyor Floorhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.09_ARC-CS001_PULP-PAPER_SCRAPER-CONVEYOR-FLOOR-EFFICIENCY.pdfARC Case Study 001: Pulp & Paper: Scraper Conveyor Floor

Nominal, based on a 250 µm (10 mil) dft

 
On porous concrete surfaces a two-coat application may be required to provide sufficient film thickness on surface for adhesion of topcoats.
  • 16 liter kit covers 53.3 m2 (586.8 ft2).
    Note: Components are pre-measured and pre-weighed.
    Each kit includes mixing and application instructions.

Available Colors

Amber