Skip Navigation LinksARC858 ARC 858

  • Extremely abrasion resistant
    • Extends equipment lifetime  
    • Reduces spare parts
    • Reduces downtime
  • High build - single coat applications
    • Quick applications
  • High adhesive strength
    • Provides long-term protection
    • Eliminates under-film corrosion
  • 100% solids; no VOCs; no free isocyanates
    • Enhances safe use
    • No shrinkage on cure
    • Resists permeation​​​​
 
Pump casings
Heat exchangers
Pipe elbows
Impellers and blades
Bins and silos
Tanks and vessels
Back plates
Hoppers
Valves
Wear plates
Transport screws
Dewatering screws​


Composition MatrixA two component, modified epoxy resin reacted with an aliphatic curing agent
​​Composit​ion ​ReinforcementA proprietary blend of ceramic particles providing smooth, erosion resistant surface
​​​​
​​​Cured Density​​​​​ 1.6 g/cc​​​100 lb/ cu.ft.
Compressive Strength(ASTM D 695) 910 kg/cm2 13,000 psi
Flexural Strength(ASTM D 790) 620 kg/cm2 8,800 psi
Flexural Modulus(ASTM D 790) 6.9 x 104 kg/cm2 9.9 x 105 psi
Tensile Adhesion(ASTM D 4541) 478.5 kg/cm2 (47 MPa) 6,810 psi
Tensile Strength(ASTM D 638) 211 kg/cm2 3,000 psi
Lap Shear Adhesion(ASTM D 1002) 150 kg/cm2 2,100 psi
Composite Shore D Hardness(ASTM D 2240)88
Taber Abrasion H-18/250 gram/1000 cycles(ASTM D 4060) 71 mg weight loss
Vertical Sag Resistance, at 21°C (70°F) and 6 mm (1/4") No sag
Maximum Temperature (Dependent on service)​Wet Service
Dry Service
70°C
160°C
158°F
320°F
​​
Click Here for Foreign Language Literature

 

 

Product Datasheet - ARC 858 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/ad858_EN.pdfProduct Datasheet - ARC 858 (English)
Application Instructions - ARC 858 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_858_EN.pdfApplication Instructions - ARC 858 (English)
ARC 858 Manual Sulzer Gun Applicationhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/ARC 858 Manual Sulzer Gun Application.pdfARC 858 Manual Sulzer Gun Application
SDS (Part A) - ARC 858, ARC 5 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/as858A_5A_EN.pdfSDS (Part A) - ARC 858, ARC 5 (English)
SDS (Part B) - ARC 858 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/as858B_EN.pdfSDS (Part B) - ARC 858 (English)

Click Here for Foreign Language Literature

 

 

ARC Case Study 013: Pulp & Paper Industry - Process Vesselshttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.13_ARC-CS013-PULP-PAPER_FIBER-FLOW-DRUM.pdfARC Case Study 013: Pulp & Paper Industry - Process Vessels
ARC Case Study 043: Pulp & Paper Industry - Paper Coneshttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.42_ARC-CS043_PULP-PAPER_CYCLONE-CLEANER-CONES.pdfARC Case Study 043: Pulp & Paper Industry - Paper Cones
ARC Case Study 011: Power - Hydroelectric/Pump Repairhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.10_ARC-CS011-POWER-HYDROELECTRIC-TURBINE_MULTI-STAGE-PUMP-SHAFT-REPAIR.pdfARC Case Study 011: Power - Hydroelectric/Pump Repair
ARC Case Study 021: Mining Industry - Pump Repairhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.20_ARC-CS021_MINING-MINERAL-ORE-PROCESSING_EXTRACTING-MINING-DEWATERING-PUMP.pdfARC Case Study 021: Mining Industry - Pump Repair
ARC Case Study 028: Pulp & Paper - Primary Fan Pumphttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.27_ARC-CS028_PULP-PAPER_PRIMARY-FAN-PUMP.pdfARC Case Study 028: Pulp & Paper - Primary Fan Pump

Nominal, based on a 750 µm (30 mil) thickness

  • 250 g kit covers 0.20 m2(2.21 ft2)
  • 940 ml cartridge covers 1.25 m2 (13.50 ft2)
  • 0.75 liter kit covers 1.00 m2 (10.6 ft2)
  • 1.5 liter kit covers 2.00 m2 (21.53 ft2)
  • 5 liter kit covers 6.67 m2 (71.76 ft2)
  • 16 liter kit covers 21.33 m2 (229.63 ft2)
     
    Note: Components are pre-measured and pre-weighed. ​
    ​Each kit includes mixing and application instructions. ​250 g, 940 ml, 0.75 liter, 1.5 liter, and 5 liter kits include tools.

Available Colors

Gray