Skip Navigation LinksARCBX2 ARC BX2

  • High ceramic loading level​​​
    • ​Extends life of equipment exposed to fine particle wear
    • Lowers coefficient of thermal expansion
    • Extends equipment life
  • Chemically resistant polymer matrix
    • Covers a broad range of chemical exposures
    • Resists cracking and delamination
  • High adhesive s​trength
    • Resists disbonding
  • Single coat application
    • Saves time and versatile
  • Low mixed viscosity
    • Eases mixing, application and finishing
  • 100% solids; no VOCs; no free isocyanates
    • Enhances safe use
    • No shrinkage on cure​
​​
Slurry pumps
Bins & hoppers
​Fanblade&housing
Hydropulpers
Slurry pipes​
Hydro-cyclones
Transport screws
Wear plates
Tur​boseparators
P​ipe elbows & spools
Chutes & hoppers
 ​​​​​


Composition Matrix A modified epoxy resin reacted with an aliphatic amine curing agent
​​Composit​ion ​Reinforcement(Proprietary​​) Blend of medium to fine sintered bauxite beads and fine SiC powders treated with polymeric coupling agent
​​​​
Cured Density2.2 g/cc137 lb/ cu.ft.
Tensile Adhesion(ASTM D 4541)238.2 kg/cm2 (23.4 MPa)3,390 psi​
Compressive Strength(ASTM D 695)950 ​kg/cm2 (93 MPa)13,500 psi
Flexural Strength(ASTM D 790)690 kg/cm2 (68 MPa)9,800 psi
Tensile Strength(ASTM D 638)340 kg/cm2 (33 MPa)4,800 psi
Impact Resistance (reverse)(ASTM D 2794)6.0 N-m53 in-lb.
Linear Coefficient of Thermal Expansion(ASTM C 531)3.9 x 10-5 cm/cm/°C2.2 x 10-5 in/in/°F
Shore D Durometer Hardness(ASTM D 2240)90
Vertical Sag Resistance at 21°C (70°F) and 6mm (1/4')No sag
Maximum Temperature(Dependent on Service)Wet Service
Dry Service
95°C
205°C
203°F
400°F
Click Here for Foreign Language Literature

 

 

SDS Part B: ARC BX2 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asBX2B_EN.pdfSDS Part B: ARC BX2 (English)
Product Datasheet - ARC BX2 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/adbx2_EN.pdfProduct Datasheet - ARC BX2 (English)
Application Instructions - ARC BX2 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_BX2_EN.pdfApplication Instructions - ARC BX2 (English)
SDS (Part A) - ARC BX2/BX5 (MX5) GY (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asBX2A_BX5AGY_EN.pdfSDS (Part A) - ARC BX2/BX5 (MX5) GY (English)
SDS (Part A) - ARC BX2/BX5 (MX5) RD (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asBX2A_BX5ARD_EN.pdfSDS (Part A) - ARC BX2/BX5 (MX5) RD (English)

Click Here for Foreign Language Literature

 

 

ARC Case Study 072: Power Industry - Fossil - Absorber Recirculation Pumpshttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.71_ARC-CS072_POWER-FOSSIL_FLUE-GAS-DESULFURIZATION-GYPSUM-EXTRACTOR-PUMPS.pdfARC Case Study 072: Power Industry - Fossil - Absorber Recirculation Pumps
WORLD COAL 2012: "The Use of Advanced Epoxy Composite Linings in Coal Handling and Preparation Plants."https://arcindustrialcoatings.chesterton.com/ArcDocuments/The_Use_of_Advanced_Epoxy_Composite_Linings_Coal_Handling_Preparation_Plants_World_Coal_2012.pdfWORLD COAL 2012: "The Use of Advanced Epoxy Composite Linings in Coal Handling and Preparation Plants."
ARC Case Study 022: Marine - Dredge Pumphttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.21_ARC-CS022_MARINE_DRY-DOCK-WATER-PUMP.pdfARC Case Study 022: Marine - Dredge Pump
ARC Case Study 057: Power Industry - Fossil - External Pipe Coatinghttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.56_ARC-CS057_POWER-FOSSIL-DESULFURIZATION_SPRAY-HEADER-SPRAY.pdfARC Case Study 057: Power Industry - Fossil - External Pipe Coating
ARC Case Study 069: Power Industry - Fossil - Coal Pulverizershttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.68_ARC-CS069_POWER-FOSSIL_COAL-PULVRIZERS-FIRED-POWER-PLANT.pdfARC Case Study 069: Power Industry - Fossil - Coal Pulverizers

ARC BX2: Nominal, based on a 3 mm (120 mil) thickness

  • 1.5 liter kit covers 0.5 m2 (5.38 ft2)
  • 5 liter kit covers 1.67 m2 (17.94 ft2)
  • ​20 kg kit covers 2.82 m2 (30.32 ft2)
     
    Note: Components are pre-measured and pre-weighed.
    Each kit includes mixing and application instructions plus tools.

Available Colors

Gray, Red 
​​