Skip Navigation LinksARCMX5 ARC BX5 (MX5)

  • Rapid cure chemistry
    • Quick return to service
  • High volumetric loading level of ceramics
    • Resists abrasive wear longer
  • Surface tolerant formulation
    • Bonds to moist and suboptimally prepared substrates
  • 100% solids; no VOCs; no free isocyanates
    • Enhances safe use
  • Mechanically tough reinforced composite
    • ​Resist mild to moderate impact applications​​
​Pneumatic conveyors
Ni-hard slurry pumps
Cyclones and hoppers
Chipper and chip bins
Fly ash separators
Wear plates
Hydro pulpers
Tran​​sport fans
Pipe elbows
Turbo separators
Screw conveyors
Pulverizers


Composition MatrixA modified epoxy resin reacted with an aliphatic amine curing agent
​​Composit​ion ​Reinforcement​Blend of sintered bauxite beads and SiC powders pretreated with polymeric coupling agent
​​​​
​​​Cured Density​​​​​2.2 g/cc​137 lb/ cu.ft.
Compressive Strength(ASTM D 695)650 kg/cm2 (110.3 MPa)9,200 psi
Flexural Strength(ASTM D 790)250 kg/cm2 (47.6 MPa)3,500 psi
Tensile Adhesion(ASTM D 4541)224.8 kg/cm2 (22.1 MPa)3,200 psi
Tensile Strength​(ASTM D 638)170 kg/cm2 (20.7 MPa)2,400 psi
Impact Resistance (reverse)(ASTM D 2794)6.6 N-m58 in-lb
Shore D Durometer Hardness(ASTM D 2240)89
Vertical Sag Resistance, at 21°C (70°F) and 6 mm (1/4")No Sag
Maximum Temperature (Dependent on Service)​Wet Service
Dry Service
60°C
120°C
140°F​​
248°F
​​
Click Here for Foreign Language Literature

 

 

Product Datasheet: ARC BX5 (MX5) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/adbx5_EN.pdfProduct Datasheet: ARC BX5 (MX5) (English)
Application Instructions: ARC BX5 (MX5) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_BX5_EN.pdfApplication Instructions: ARC BX5 (MX5) (English)
SDS (Part A) - ARC BX2/BX5 (MX5) GY (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asBX2A_BX5AGY_EN.pdfSDS (Part A) - ARC BX2/BX5 (MX5) GY (English)
SDS (Part A) - ARC BX2/BX5 (MX5) RD (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asBX2A_BX5ARD_EN.pdfSDS (Part A) - ARC BX2/BX5 (MX5) RD (English)
SDS (Part B) - ARC BX5 (MX5) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asBX5B_EN.pdfSDS (Part B) - ARC BX5 (MX5) (English)

Click Here for Foreign Language Literature

 

 

ARC Case Study 026 - Mineral-Ore - Coal Chutehttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.25_ARC-CS026_MINING-MINERAL-ORE-PROCESSING-BENEFICIATION_COAL-CHUTE-_SQUARE-TO-_ROUND-TRANSITION.pdfARC Case Study 026 - Mineral-Ore - Coal Chute
ARC Case Study 127 - Mineral-Ore - Screen Discharge Chutehttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23606.22_ARC_CS127_MINING-MINERAL-ORE-PROCESSING_BENEFICIATION_SCREEN-DISCHARGE-CHUTE.pdfARC Case Study 127 - Mineral-Ore - Screen Discharge Chute

Nominal, based on a 3 mm (120 mil) thickness

  • 0.75 liter kit covers 0.25 m2 (2.69 ft2)
  • 2.5 liter kit covers 0.83 m2 (8.93 ft2)
     
    Note: Components are pre-measured and pre-weighed.
    Each kit includes mixing and application instructions plus tools.

Available Colors

Gray, Red