Skip Navigation LinksARCNVETC ARC NVE

  • ​​Resists concentrated chemicals ;i.e. Alkalis, Acids and Solvents
    • Makes selection easy
    • Covers a broad range of exposures
  • Coefficient of Thermal expansion comparable to concrete
    • Resists disbondment
    • Resists cracking and delamination
  • Tough quartz reinforced composite
    • Serves demanding applications
  • Deep penetrating primer system
    • Promote high adhesion to concrete
  • Integrated topcoat sealer system
    • Blocks chemical penetration
    • Stops migration of chemicals
  • Reinforcement with coupling agent
    • Minimizes coating voids​
    • Permeation resistant
 
Battery rooms
Chemical containments
Pickling/plating lines
Pump & equipment bases
Bleaching areas
Pickling rooms
Sumps, trenches & pits
Chemical loading stations


Composition NVE PC A modified epoxy novolac vinyl ester resin reacted with catalyst
​​Composit​ion ​NVE TC MatrixA modified epoxy novolac vinyl ester resin reacted with catalyst
​​Composit​ion ​NVE TC Reinforcement Proprietary quartz reinforcement blend (QRV) pre-treated with polymeric coupling agent
​​Composit​ion ​NVE VC MatrixA low viscosity modified epoxy novolac vinyl ester resin with reacted with catalyst
​​Composit​ion NVE VC ReinforcementA proprietary blend of permeation resistant, inert particles
​​​​
​​​Cured Density​​​​​ 2.24 g/cc​126 lb/ cu.ft.
Compressive Strength(ASTM C 579)801 kg/cm2 (78.6 MPa)11,400 psi
Tensile Adhesion(ASTM C 307)100 kg/cm2 (9.9 MPa) 1,438 psi
Flexural Strength(ASTM C 580) 177 kg/cm2 (17.4 MPa) 2,535 psi
Flexural Modulus of Elasticity(ASTM C 580) 1.29 x 105 kg/cm2 1.8 x 106 psi
Bond Strength
Excellent - 100% Concrete Failure
>39 kg/cm2 (3.86 MPa) > 560 psi
Linear Coefficient of Thermal Expansion(ASTM C 531) 26.7 x 10-6 cm/cm/°C 14.8 x 10-6 in/in/°F
VOC EPA 24 2.2%
Thermal Compatibility to Concrete(ASTM C 884)Pass
Maximum Temperature (Dependent on Service)Wet Service (continuous)
Dry Service (continuous)
135°C
200°C
275°F
392°F
​​
Click Here for Foreign Language Literature

 

 

Product Datasheet - ARC NVE System Kit (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/adnve_EN.pdfProduct Datasheet - ARC NVE System Kit (English)
Application Instructions - ARC NVE System Kit (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_NVE_EN.pdfApplication Instructions - ARC NVE System Kit (English)
SDS (Part B) - ARC CHP (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asCHP_EN.pdfSDS (Part B) - ARC CHP (English)
SDS (Part A) - ARC NVE LTGY Top Coat (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asNVELTGYTA_EN.pdfSDS (Part A) - ARC NVE LTGY Top Coat (English)
SDS (Part A) - ARC NVE LTGY Veil Coat (LTGY) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asNVELTGYVA_EN.pdfSDS (Part A) - ARC NVE LTGY Veil Coat (LTGY) (English)

Click Here for Foreign Language Literature

 

 

Nominal System Kit coverage 9.7 m² (104 ft²)

    The NVE 3-Layer, 5 component System Kit:
  • NVE Primer Coat (PC)
    1 x 2.1 L (.55 gal) container
    Nominal DFT of 125-180 μm (5-7 mil)
  • NVE Top Coat (TC)
    1 x 16 L (4.22 gal) container
    Nominal WFT of 6 mm (240 mil) extended with 7 bags of QRV
  • NVE Veil Coat (VC)
    1 x 4.8L (1.27 gals) container
    Nominal WFT* of 250-375 μm (10-15 mil)
  • ARC CHP Catalyst
    2 X 250 ml containers
  • 7 bags of QRV reinforcement
     
    Note: Components are pre-measured and pre-weighed.​

Available Colors

Red or Gray*
 
* Available from our EME Manufacturing
Facility only