Skip Navigation LinksARCS2 ARC S2

  • Abrasion resistant surface
    • Extends equipment life
    • Reduces downtime
  • ​ ​​High gloss, low drag surface
    • Improves material flow
    • Enhances efficiency
  • High adhesive strength
    • Prevents underfilm corrosion
  • 100% solids; no VOCs; no free isocyanates
    • Enhances safe use
    • No shrinkage on cure
    • Resists permeation
  • Low viscosity: brush, roller or spray applied coating
    • Easy to apply
    • Saves repair time
 
​​​​
Tank Lining
Structural steel
Pipe ID & OD
Fans & housing
Condensers
Heat exchangers
Hoppers
Absorber modules​
Pumps & valves


Composition MatrixA modified epoxy resin reacted with an aliphatic curing agent
​​Composit​ion ​ReinforcementProprietary blend of fine ceramic reinforcements
​​​​
​​​Cured Density​​​​​ 1.52 g/cc 94.89 lb/ cu. ft.
Compressive Strength(ASTM D 695) 660 kg/cm2 (64.8 MPa)9,400 psi
Flexural Strength(ASTM D 790) 770 kg/cm2 (75.5 MPa)11,000 psi
Tensile Adhesion(ASTM D 4541)463 kg/cm2 (45.5 MPa)6,590 psi
Tensile Strength(ASTM D 638)470 kg/cm2 (46.1 MPa)6,700 psi
Tensile Elongation(ASTM D 638) 4%
Flexural Modulus(ASTM D 790)5.5 x 104 kg/cm2 (5393 MPa)5.4 x 105 psi
Shore D Durometer Hardness(ASTM D 2240)85
Lap Shear Adhesion(ASTM D 1002) 150 kg/cm2 (14.7 MPa) 2,100 psi
Vertical Sag Resistance, at 21°C (70°F) and 0.25 mm (10 mils)No sag
Cathodic Disbondment(ASTM G 8)Passes
Taber Wear H-18/1000 cycles/1 kg load(ASTM D 4060)0.028 g loss
Maximum Temperature (Dependent on Service)​Wet Service
Dry Service
52°C
80°C
125°F
175°F
​​
Click Here for Foreign Language Literature

 

 

SDS (Part A) - ARC S2 (GN, GY) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asS2a_EN.pdfSDS (Part A) - ARC S2 (GN, GY) (English)
SDS (Part B) - ARC S2(E) GN, GY (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/ARC S2(E) GN Part B, ARC S2(E) GY Part B_V-2,03_2018-01-12_GB-en Che-10B.pdfSDS (Part B) - ARC S2(E) GN, GY (English)
Application Instructions - ARC S2 (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_S2_EN.pdfApplication Instructions - ARC S2 (English)
Product Datasheet - ARC S2 (E) (English) Available EMEA onlyhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/084985EU_PM9607_PDS_ARC_S2 (E)_EN.pdfProduct Datasheet - ARC S2 (E) (English) Available EMEA only
Application Instructions - ARC S2 (E) (English) Available EMEA onlyhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/085031EU_PM9481_AI_ARC_S2 (E)_EN.pdfApplication Instructions - ARC S2 (E) (English) Available EMEA only

Click Here for Foreign Language Literature

 

 

ARC Case Study 125 - Fossil Power - Tube Sheet Rehabilitationhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23606.2_ARC_CS125-POWER-FOSSIL_CIRC-SERVICE-WATER-SYSTEM_TUBE-SHEET.pdfARC Case Study 125 - Fossil Power - Tube Sheet Rehabilitation
WORLD COAL 2012: "The Use of Advanced Epoxy Composite Linings in Coal Handling and Preparation Plants."https://arcindustrialcoatings.chesterton.com/ArcDocuments/The_Use_of_Advanced_Epoxy_Composite_Linings_Coal_Handling_Preparation_Plants_World_Coal_2012.pdfWORLD COAL 2012: "The Use of Advanced Epoxy Composite Linings in Coal Handling and Preparation Plants."
ARC Case Study 022: Marine - Dredge Pumphttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.21_ARC-CS022_MARINE_DRY-DOCK-WATER-PUMP.pdfARC Case Study 022: Marine - Dredge Pump
ARC Case Study 026 - Mineral-Ore - Coal Chutehttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.25_ARC-CS026_MINING-MINERAL-ORE-PROCESSING-BENEFICIATION_COAL-CHUTE-_SQUARE-TO-_ROUND-TRANSITION.pdfARC Case Study 026 - Mineral-Ore - Coal Chute
ARC Case Study 067 - Water Treatment - OEM Split Case Pumphttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.66_ARC-CS067_WATER-TREATMENT-DISTRIBUTION_OEM-SPLIT-CASE-PUMP.pdfARC Case Study 067 - Water Treatment - OEM Split Case Pump

Nominal, based on 375 μm (15 mil)

  • 1125 ml cartridge covers 3.00 m2 (32.29 ft2)
  • 1.5 liter kit covers 3.94 m2 (42.4 ft2)
  • 5 liter kit covers 13.33 m2 (143.52 ft2)
  • 16 liter kit covers 42.67 m2 (459.26 ft2)
Note: Components are pre-measured and pre-weighed.
Each kit includes mixing and application instructions.
1.5 liter and 5 liter kits include tools.

Available Colors

Gray or Green
​​