Skip Navigation LinksARCSD4i ARC SD4i

  • Abrasion resistant surface
    • Extends equipment life
    • Reduces spare parts
    • Reduces downtime
  • High gloss, low drag surface
    • Improves material flow
    • Enhances efficiency
  • High adhesive strength
    • Prevents under-film corrosion
  • 100% solids; no VOCs;no free isocyanates
    • Resists disbonding
    • No shrinkage on cure
    • Resists permeation
  • Low viscosity, thin film, brush, roller and spray applied
    • Easy to apply
    • Saves repair time
 
Flotation cells
Deaerators
Heat exchangers
Thickener ​tanks
Hoppers
Slurry Tanks
Hydrocyclones
Slurry pipes
​Bins and silos


Composition MatrixA modified epoxy resin structure reacted with an aliphatic amine curing agent
​​Composit​ion ​Reinforcement​Proprietary blend of fine ceramic reinforcements
​​​​
​​​Cured Density​​​​​ ​1.8 g/cc ​112 lb/ cu.ft.
Flexural Strength(ASTM D 790)640 kg/cm2 (62.7 MPa)9,100 psi
Tensile Adhesion(ASTM D 4541)241 kg/cm2 (23.7 MPa) 3,430 psi
Tensile Strength(ASTM D 638) 270 kg/cm2 (26.4 MPa) 3,800 psi
Tensile Elongation(ASTM D 638) 2.8%
Flexural Modulus(ASTM D 790)6.2 x 104 kg/cm2 (6080 MPa) 8.8 x 105 psi
Shore D Hardness (ASTM D 2240)85
Vertical Sag Resistance, at 21°C (70°F) and 250 μm (10 mils) No sag
Taber Wear H-18/1000 cycles/1 kg load(ASTM D 4060) 0.26 g loss
Maximum Temperature (Dependent on Service)​Wet Service
Dry Service
65°C
120°C
149°F
248°F
​​
Click Here for Foreign Language Literature

 

 

Application Instructions - ARC SD4i (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/AI_SD4i_EN.pdfApplication Instructions - ARC SD4i (English)
Product Datasheet - ARC SD4i (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/adsd4i_EN.pdfProduct Datasheet - ARC SD4i (English)
SDS (Part A) - ARC SD4i (BLU, GY) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asSD4ia_EN.pdfSDS (Part A) - ARC SD4i (BLU, GY) (English)
SDS (Part B) - ARC SD4i (BLU, GY) (English)https://arcindustrialcoatings.chesterton.com/ArcDocuments/asSD4iB_EN.pdfSDS (Part B) - ARC SD4i (BLU, GY) (English)

Click Here for Foreign Language Literature

 

 

WORLD COAL 2012: "The Use of Advanced Epoxy Composite Linings in Coal Handling and Preparation Plants."https://arcindustrialcoatings.chesterton.com/ArcDocuments/The_Use_of_Advanced_Epoxy_Composite_Linings_Coal_Handling_Preparation_Plants_World_Coal_2012.pdfWORLD COAL 2012: "The Use of Advanced Epoxy Composite Linings in Coal Handling and Preparation Plants."
ARC Case Study 138: Fossil-Power - Flue Gas Desulfurization - Limestone Slurry Recirculation Pumphttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN24256_ARC-CS138_MX1_AEP Power_FGD_PumpSuction.pdfARC Case Study 138: Fossil-Power - Flue Gas Desulfurization - Limestone Slurry Recirculation Pump
ARC Case Study 141: Mining/Mineral & Ore Processing - Mine Process Tankhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN24272_ARC_CS141_MINING-MINERAL-ORE-PROCESSING_MINE-PROCESS-TANK.pdfARC Case Study 141: Mining/Mineral & Ore Processing - Mine Process Tank
ARC Case Study 038: Chemical Processing - Extraction Fanhttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.36_ARC-CS038_CHEMICAL-PROCESSING-PROCESS-EQUIPMENT_FERTILIZER-PRODUCTION-EXTRACTION-FAN.pdfARC Case Study 038: Chemical Processing - Extraction Fan
ARC Case Study 049: Oil & Gas Industry - Hydrocycloneshttps://arcindustrialcoatings.chesterton.com/ArcDocuments/EN23593.48_ARC-CS049_OIL-GAS_HYDROCYCLONES.pdfARC Case Study 049: Oil & Gas Industry - Hydrocyclones

Nominal, based on 1 coat; total DFT 375 μm (15 mil)

  • 1125 ml cartridge covers 2.95 m2 (31.8 ft2)
  • 5 liter kit covers 13.3 m2 (143.1 ft2)
  • 16 liter kit cover​s 42.7 m2 (460 ft2)
     
    Note: Components are pre-measured and pre-weighed.
    Each kit includes mixing and application instructions.
    5 liter kit includes tools.

Available Colors

Gray and Blue